
50
47_processor_Regatta_um_UK_40
12.
PROCESSOR REGATTA SOFTWARE EVOLUTION
REV
Date
Information
V1.9
30/03/2010
-
Addition of the True heading and True true wind direction channels
V2.0
-
Calculation of the direction of the bottom wind
-
Calculation of bottom wind speed
-
Auto-detection of 3D hull sensor (V1, V2, Compas Regatta, KVH)
-
Management of offsets in CAP MAG2 emergency magnetic heading mode
(KVH or NMEA)
-
Addition of the autocompensation function of the Regatta compass
-
Added management of offset heading, list and pitch in the Regatta
compass
-
Added heading, heel and pitch filtering in the Regatta compass
V2.1
-
Bug fixes
V2.2
-
Modification Management of degraded water speed mode. If US speedo
not hooked, calculation on speed over ground and “Pan” display.
-
Authentication of the elements of the bus when the list is created. If the
firmware is not up to date, the Processor does not start.
-
Modification of the management of the blue control led
V2.3
-
Limitation of heel angle calculation to a maximum of 60 °
-
Limitation of the pitch angle calculation to a maximum of 40 °
-
Added error message when 3DH data is outliers
V2.4
12/07/2011
-
Compatibility with Topline GPS
V2.5
15/10/2012
-
Compatibility with the latest 3DH V2 firmware
-
Correction of sign error on pitch
-
Addition of the Graphic Multifunction authentication
V2.6
-
Correction of the loss of an NMEA source after a timeout (example during a
GPS stall)
V2.7
-
Addition of identifiers of wifi interfaces
-
Quick scan of the Multifunction graphic for the pilot
V3.2
28/10/2013
-
Fixed a bug on wind noise reduction.
-
Wind noise reduction coefficients, to be set in "Constants" according to the
compass sensor:
V3.7
14/09/2015
-
Compatibility with 3D Fusion
-
Fixed Processor crash when NMEA baudrate is incorrectly configured
-
Not compatible with Sailtune V2.1
V3.9
12/09/2016
-
Compatibility with 3D sensor V3
-
Compensation available from the processor web page (for 3D Sensor V3)
-
Compatibility with Loch paddle wheel
V4.0
07/02/2019
-
Compatibility with Multidisplay and Pad
-
Compatibility with the latest 3D Sensor V3 in automatic detection