8
38_Carbowind_HR_um_UK_28
3 INSTALLATION
3.1 LIST OF ACCESSORIES
-
Cable Carbowind avionic 25m : 90-60-381
-
Cable Carbowind avionic 35m : 90-60-351
-
Carbowind Trapezoidal Tube : 90-60-537
3.2 INSTALLATION PRECAUTIONS
The CARBOWIND HR is fixed on the mast head using a carbon trapezoidal tube.
3.3 FIXING THE CABON TUBE
This Trapezoidal tube must be laminated at the top of the mast. The CARBOWIND HR pole is
inserted into this tube and locked in rotation due to this trapezoidal shape.
Note that, the internal diameter of the support tube is perfectly adjusted, so that there is no play
with the CARBOWIND HR pole and that the whip of it does not cause the initiation of rupture.
Warranty conditions
Carbowind HR reference 90-60-370-012 – Carbowind Trapezoidale tube référence 90-60-537
We decided to review the design of the sensor itself and the sleeve to be used for the support.
This sleeve is specific to the Carbowind HR since 2016.
The study of warranty coverage will be done only if the tube reference 90-60-537 is used.
The round inner shape should be mounted upwards.
Grease the bottom of the Carbowind to allow easier extraction.
It is advisable to install a thermo-retractable sheath with glue on the top of the sleeve to seal
the connection.
1. In the case of mounting at the top of the mast.
The sleeve is not structural, it must be consolidated by laminating reinforcement (0 ° fiber
enclosed in a peripheral winding).
For the anti-extraction make a textile shingle attached to a fixed point of the mat head.
