10
3 . Operate instruction
This chapter describes the operation of the NK. Remark, different kind of system
has its own special operate. And pls referen
ce to the system’s user manual such as PTZ
speed dome and matrix user manual to do some adjusting.
3.1 Power connection
Before using the NKB, pls charge the power for the battery. Put in the battery and connect
to the adaptor. It will auto charge the power while you connect to the AC adaptor.
1 Connect the power cable to AC adaptor
2 Connect the AC adaptor to NKB
3.2 START/STOP controller
Turn the switch to “—”as(Figure 2.1) to START the controller. And turn to“○”to STOP the
controller.
Attention
NKB will AUTO checking the BAUD RATE, PROTOCOL,TARGET PTZ speed dome and
Monitor. Press the MENU, all these information will show on the TFT screen.
Attention
3.3 Operation system
NKB support the Windows 2000
，
Windows XP
，
Windows Vista Operation system. Screen
as
（
Figure 3-3.1
）
Keys
Joystick
Figure 3.1
Pls do not operate the
Navigation
Key, while the NKB is under initialization
the system.
8” TFT Screen
Do not turn the switch to
“○”
while you are running controller and not turn
to “
—”while you are stopping it.
