Nixie Clock IV-11, Руководство по сборке

Страница: 4 / 14

4 / 14
Parts list
Before getting started, please check the contents of the package. If any are missing,
please contact the seller.
No. Name Description Designator Footprint Qty Value
1 STC15F2K56S2 Programmed MCU SKDIP28 1
2 TD62783APG IC U1, U2, U3, U4, U5, U6 DIP18 6
3 74HC595N IC U7, U8, U9, U10, U11, U12 DIP16 6
4 LPD8806D IC U13 DIP16 1
5 MC34063 IC U16, U17 DIP8 2
6 DS3231Module RTC Module U15 DIP8 1
7 IR Receiver U14 HS0038 1
8 IRFU5305
P-Channel Power MOSFET
Q1 TO-251 1
9 IRLU024
N-Channel Power MOSFET
Q2 TO-251 1
10 BS250
P-Channel Power MOSFET
Q6 TO-92 1 BS250
11 Capacitor C8, C10 C-102 2 330pF
12 Capacitor
C1, C2, C3, C4, C5, C6, C12, C14, C15, C16
C-102 10 0.1uF
13 Polarized Capacitor C11 C-4x6 1 10uF/25v
14 Polarized Capacitor C13 C-6.3x8 1 100uF/35v
15 Polarized Capacitor C7, C9, C17 C-6.3x8 3 220uF/16V
16 Battery Socket Battery Socket CR1220 1
17 Battery Battery CR1220 1
18 FUSE F1 F3.6x10 1 250V-1.5A
19 Buzzer Buzzer BUZZER9mm 1
20 Power Socket DC5V DC-003 1
21 Headset Socket GPS, Temp PJ-313 2
22
Ambient Light Sensor
ALS 5mm 1
23 PNP Transistor Q3, Q5 TO-92 2 C9015C
24 NPN Transistor Q4, Q7 TO-92 2 C9014C
25 Resistor R28, R31 1/4W 2 0.24
26 Resistor R5 1/8W 1 10
27 Resistor R11, R14, R17, R20, R23, R26 1/8W 6 120
28 Resistor
R9, R10, R12, R13, R15, R16, R18,
R19, R21, R22, R24, R25, R30
1/8W 13 200
29 Resistor R1, R3, R4 1/8W 3 1K
30 Resistor R2 1/8W 1 4.7K
31 Resistor R8, R27, R32 1/8W 3 10K
32 Resistor R6, R7 1/8W 2 20K
33 Resistor R29 1/8W 1 100K
34 Inductance L1, L2 L-5x12 2 100uH
35 Diode D2 1 1N4007
36 Schottky Diode D1, D3 2 1N5819
37 LEDs
LED1, LED2, LED3, LED4, LED5, LED6
5mmRGB 6
38 VFD tubes IV1, IV2, IV3, IV4, IV5, IV6 IV11 6
Housing parts and accessories
No. Name Description Quantity
1 PCB board 203 x 50 x 1.6mm Gold plating 1
2 VDF tube spacer Laser cut 12
3 Plastic spacer
Φ
5mm x 11mm for support IR receiver 1
4 Plastic spacer
Φ
5mm x 3mm for support light sensor 2
5 Rubber sleeve
Φ
7mm x 9mm for cover light sensor 1
6 IR remote controller NCH 1
7 Power adapter DC 5V 1.5A 1
8 Top and bottom plate Laser cut 2
9 Wooden frame 1
10 Copper spacer
M3x18mm female-female for support top and bottom plate
4
11 Copper spacer M3 x 5mm female-female for support PCB board 5
12 Philips screw M3 x 4mm to affix PCB board 5
13 Hexagon socket head screw M3 x 5mm to affix PCB board 5
14 Hexagon socket head screw M3 x 8mm to affix top and bottom plate 8