8
Stand Installation
1) Open the package, take out the product with foam still attached, and gently place it on a desktop or
table.
2) Remove the extra parts and the foam covering the back of the monitor. Then press the button to remove the stand plate.
3) Use the screwdriver and three screws to fasten the base to the stem. Next use two screws to fasten the stand plate to the
stem.
4)
Insert the stand's plate into the opening on the back of the
monitor. It should click into place. Make sure the stand
is
securely attached to the back of the monitor then remove the monitor from the remaining foam section and stand it
up on a table or desk as
desired. If needed, the stand can easily be detached from the monitor by pressing the button
near the stand plate. Make sure the monitor is laid on a flat surface before removing the stem.
