NIX4 and NIX6
User’s Guide
NIX4 and NIX6
User’s Guide
11
7.2
Time, Date and Display Options
The first tile, called “Time, Date and Display” allows
setting of the time and date, as well as display options such as
when to automatically show the date/temperature. The table below lists the different settings available:
Item Setting Name
Description
①
Time and date
When the slider is ‘on’ (as shown
below) then the current PC time and date will be
applied when the tile settings apply button is clicked. If the slider is set to off, a
manual time and date entry box will appear.
②
Time Format
Select 12hr (default) or 24hr time display format
③
Date Format
Select DD.MM.YY (default) or MM.DD.YY date format.
For four-tube models, the date is shown as DD.MM or MM.DD
④
Temperature units Select °C (default) or °F temperature units.
⑤
Show leading zero
Enable or disable (default) time screen leading zero. Eg:
8:35
becomes
08:35
⑥
Button beep
Enable or disable (default) beep on button press, with two loudness settings.
⑦
Colon mode
For the colon between the hours, minutes and seconds, choose between colon off,
colon solid on (default), fast (0.5Hz) flash or slow (1Hz) flash.
This setting only applies to the time display screen.
⑧
Display mode
Choose to show just the time screen (default), or automatically display the date
and/or temperature every 30 seconds, 1 minute, or 5 minutes. The duration of
each screen is about 3 seconds.
⑨
Night Detection
Mode
Choose to have night mode dimming either based on the ambient light level
(default) or based on a time window.
When “Based on a timer” is selected, enter
the start and end times to the nearest 15 minutes (as shown below).
When “Based on ambient light” is selected, a button will appear that can be used
to set the threshold to the current ambient level.
①
②
③
④
⑤
⑥
⑦
⑧
⑨
