background image

51

➔ 

Then extract the brewing unit care-

fully by the handle (fig. 9). 

➔ 

Wash the brewing unit under runn -

ing water and then let it dry.

➔ 

Replace and lock the brewing unit

with equal care by pressing the red
lever switch and turning the handle to
the right until it clicks.

➔ 

Replace the cover and screw the

screws back in.

FROM MODEL NICR 750 ONLY: Your
appliance is equipped with moveable
rear rollers (see image 1/S). This allows
it to be moved easily on a level 
worktop. This enables you to clean
underneath the base of the unit both
effortlessly and easily.

... 5. Maintenance and Care

6. System messages

Note: 

The message “FILL UP BEANS” only disappears

when coffee has been brewed after refilling!

Message

FILL-UP
PIPE-SYSTEM

FILL WATER

FILL UP BEANS

EMPTY TRAYS

Meaning

Fill or rinse out water  
hoses (inside)

Fresh water filter in 
use may be faulty 

Water reservoir (fig. 2) 
is empty

Water reservoir (fig. 2) 
is absent or incorrectly
positioned

Not enough coffee 
beans

Coffee beans do not  
fall into grinder (stuck) 

Drip tray (fig. 1/Z) 
and / or used coffee 
tray (fig. 1/U) are full

Contacts on back of 
drip tray are not clean

What to do

Turn hot water control
knob(fig. 1/Q and 7) 
to the right to open 
valve

remove or change 
the filter cartridge

Add fresh water 

Correctly position 
water reservoir

Add beans to the 
container (fig. 3) 

Stir beans, e.g. with a 
spoon, to loosen

Empty drip and / or  
used coffee tray

Clean contacts

Содержание CafeRomatica NICR7




























Отзывы: