Nivona CafeRomatica NICR7, Руководство по эксплуатации

Страница: 17 / 27

46
4.6 Language
You can set 14 different languages:
German, English, French, Italian,
Dutch, Polish, Russian, Estonian,
Czech, Swedish, Danish, Lithuanian,
Hungarian and Turkish. The default
setting is German.
➔
Press the program key P to enter
programming mode.
➔
Press the > key until “WÄHLE
SPRACHE” (“SELECT LANGUAGE”)
appears
➔
Press the ok key.
➔
Press the > key until your
desired language appears.
➔
Confirm your selection by press ing
ok . The display reads “SELECT
LANGUAGE”.
➔
You can now either continue in pro-
gramming mode to change other func-
tion settings or press
exit to
leave programming mode.
4.7 Statistics
This program allows you to read how
often the following functions have
been used since the machine started
operating: “1 CUP” / “2 CUPS” /
“POWDER” / “TOTAL” (number of
coffees served) “WATER” / “STEAM” /
“CLEANING” / “DESCALING” /
“FIL. CHANGES”.
➔
Press the program key P to enter
programming mode.
➔
Press the > key until “SELECT STA-
TISTICS” appears.
➔
Press the ok key.
➔
Press the > key until the desired
statistic appears.
➔
You can return to “SELECT STATIST-
ICS” at any stage by pressing ok .
➔
You can now either continue in pro-
gramming mode to change other func-
tion settings or press
exit to
leave programming mode.
4.8 Rinsing setting
The rinsing program (manually activa-
ted) is pre-programmed and installed
by the manufacturer. Each time the
appliance is switched on when it is
cold from not having been used for a
while, it heats itself up again and
requires rinsing, in order to be tho-
roughly clean and to boil fresh water.
This rinsing requirement will be
shown in the display and by pressing
the “S” button it can be manually
started (fig. 1/ I).
Optionally, you can also program it to
automatically rinse after switching the
appliance off:
➔
Press the program key P to enter
programming mode.
➔
Press the > key until “SELECT
RINSING” appears.
➔
Press the ok key.
➔
Press the > key to select “OFF
RINSE YES” or “OFF RINSE NO” .
➔
Press the ok key to confirm. The
display reads “SELECT RINSING”.
➔
You can now either continue in pro-
gramming mode to change other func-
tion settings or press
exit to
leave programming mode.
Note: Programmed OFF rinse, will
only be carried out if a coffee has
been previously made.
4.9 Energy / ECO Mode
Your appliance is equipped with a
modern, programmable power saving
function (ECO Mode). This is factory-
set and means that the appliance
... 4. Programming functions