Nivona caferomatica NICR6 series, Руководство пользователя и рекомендации по использованию

Страница: 24 / 37

Information: Should you wish to cancel the Live programming after the start, hold the rotary down for
longer than three seconds.
The display shows “SELECT STRENGTH’’.The display shows “SELECT STRENGTH’’.
➔
Turn the rotary to select the strength of your choice (weaker to the left and stronger to the right).
➔
Press the rotary to confirm the choice of your strength.
The display shows “SELECT FLAVOUR’’.
➔
Turn the rotary to select the flavour of your choice (for explanation of the flavour profiles see
point 3.3).
➔
Press the rotary to confirm your choice of flavour.
The display shows “PLEASE PLACE CUP UNDERNEATH COFFEE OUTLET’’.
➔
Place a cup underneath the coffeeoutlet and press the rotary to confirm,
The display shows “PLEASE WAIT’’. The device is grinding, heating and will then start with the
preparation.
First, the coffee is prepared.
The display shows “STOP COFFEE?’’
➔
Press the rotary when the desired amount of coffee is prepared.
Information: If you wish to prepare
hot water only (without coffee) i.e. for tea, turn the rotary to
“SETTINGS’’, “BEVERAGE RECIPED’’, “HOT WATER’’ and proceed as described in the following steps.
After the coffee part of the Cafe Americano is prepared, the display shows “PLEASE PLACE CUP
UNDERNEATH THE WATER OUTLET’’.
➔
Place a cup underneath the
wateroutlet (picture 1/P) and press the rotary to confirm.
The display shows “OPEN VENT’’.
Warning: Ensure that the tap of the spumatore is upright. This is how the hot water is created.
➔
Turn the steam-hot water- rotary knob (picture 1/C) clockwise up to the stop.
The display shows “STOP HOT WATER?’’
➔
Press the rotary when the desired amount of hot water is prepared.
The display shows “CLOSE VENT’’.
➔
Close the steam-hot water-rotary knob anticlockwise when the desired amount of hot water is
prepared.
The standard setting for CAFE AMERICANO is now changed and saved. The display shows “RECIPE
CREATED’’ for a short amount of time and returns to the main menu with the new standard settings.
4.4.2. Manual programming for Cafe Americano
You can also change the standard setting manually as follows.
➔
Select the menu option “SETTINGS’’ in the main menu by turning the rotary and then press the
rotary.
➔
Turn the rotary to “BEVERAGES RECIPES’’. Press the rotary.
➔
Turn the rotary to “AMERICANO’’. Press the rotary.
Select strength
➔
Turn the rotary to “STRENGTH’’. Press the rotary.
22
• 
4. Prepare coffee specialities