Nivona caferomatica NICR6 series, Руководство пользователя и рекомендации по использованию

Страница: 13 / 37

➔
You confirm the chosen setting by pressing the rotary.
➔
By choosing “EXIT’’ and then pressing the rotary, you get to the next menu level above: From the
chosen setting via the menu “SETTINGS’’ to the main menu.
3.1. Set the operation with or without filter
➔
To change the operation to with or without filter, chose the menu option “SETTINGS’’ in the main
menu by turning the rotary and then press the rotary.
➔
Chose the option “FILTER’’ in “SETTTINGS’’ by turning the rotary.
Operate the appliance
with filter: Please follow the procedure under point 2.4.1.
Operate the appliance without filter: Please follow the procedure under point 2.4.2
➔
You can carry on directly with the programming of further setting from this position or you can
leave the setting with choosing “EXIT’’ and then pressing the rotary.
3.2. Set water hardness
➔
To change the water hardness, choose the menu option “SETTINGS’’ in the main menu by turning
the rotary and then press the rotary.
➔
Choose the option “WATER HARDNESS’’ in “SETTINGS’’ by turning the rotary.
Please follow the procedure in point 2.4.3 afterwards.
➔
You can carry on directly with the programming of further setting from this position or you can
leave the setting with choosing “EXIT’’ and then pressing the rotary.
3.3. Choose the flavour
Depending on your wish, you can choose the flavour. Thus, you can change the flavour of your coffee
as desired. For this, there are three profiles for the flow velocity of the water through the coffee
grounds on file under option “FLAVOUR’’. Profile 1 “DYNAMIC’’ ensures a dynamic flow, Profile 2
“CONSTANT’’ a constant flow and Profile 3 “INTENSE’’ ensures a intensive flow. The factory setting is
“INDIVIDUAL’’, viz. you can change your flavour setting individually for each coffee recipe. However,
should you choose a Flavour Profile 1, 2 or 3 at this point, it will apply for all coffee specialities.
Tip: Test your favourite flavour profile on one of the beverages.
➔
To change the flavour setting, choose the menu option “SETTTINGS’’ in the main menu by turning
the rotary and then press the rotary.
➔
Turn the rotary to “FLAVOUR’’. Press the rotary.
➔
Turn the rotary to the flavour profile of your choice.
➔
Press the rotary to confirm your setting.
➔
You can carry on directly with the programming of further setting from this position or you can
leave the setting with choosing “EXIT’’ and then pressing the rotary.
3.4. Set temperature
You can set the temperature for coffee, mild and hot water to
“NORMAL”, “HIGH”, “MAXIMUM” or “INDIVIDUAL” as desired. The factory setting is “HIGH’’.
When you have set the temperature as described below, it will apply for all coffee specialities.
However, you can set the temperature to “INDIVIDUAL’’ for each coffee speciality (see point 4
below). Then, choose the setting “INDIVIDUAL’’ in this menu as follows:
11
• 
3. Take/change basic settings