8
... 2. Set up
2.2 Getting started
➔
Remove the plug from the power
cord compartment (fig. 1/V) and plug
the machine in.
➔
Press the On / Off button (fig. 1/H).
„SYSTEM HEIZT“ (“SYSTEM IS
HEATING”) appears in the display
(*otherwise, please see the following
Note
below).
➔
After the machine has warmed up,
the service button (fig. 1/I) flashes.
The instruction „BITTE SPÜLEN“
(“PLEASE RINSE”) flashes in the
display.
➔
Now place a cup under the height-
adjustable coffee spout (fig. 1/J and 5)
and press the service button (fig. 1/I).
The system is then filled with water
and completely rinsed out via the
coffee spout (fig. 1/J and 5).
➔
The machine is now operational.
Note:
Please see point 4.5 to change
language!
*Note:
For manufacturing reasons,
the machine hoses may still be empty
when the machine is first operated.
The machine indicates this as follows:
➔
After the machine has been swit-
ched on using the On / Off button
(fig. 1/H), “SYSTEM FÜLLEN”
(“PIPE-SYSTEM FILLS UP”) and
“VENTIL DREHEN” (“TURN VALVE”)
appear alternately in the display.
➔
Hold a container under the jet and
open the steam / hot water con trol
valve (fig. 1/Q and 7) by turn ing knob
to the right. The system now fills up
and some water may come out of the
jet (fig. 1/T).
➔
As soon as the “VENTIL DREHEN”
(“TURN VALVE”) signal reappears,
you can turn the valve control knob
(fig. 1/Q and 7) back to The left to shut.
➔
After the machine has warmed up,
the service button (fig. 1/I) flashes.
The instruction “BITTE SPÜLEN”
(“PLEASE RINSE”) flashes in the
display.
➔
Press the service button (fig. 1/I)
and the system is rinsed out via the
coffee spout (fig. 1/J and 5).
➔
The machine is now operational.
2.3 Grinder settings
Caution:
Grinder settings can only be
adjusted when the grinder is in opera-
tion. You can adjust the grinder to suit
the roast of your coffee beans. We re -
commend that you leave the grinder
on a medium setting.
➔
Open the lid of the bean con tainer
(fig. 1/N).
➔
Turn the control knob (fig. 1/M and
3) to the desired position while the
grinder is running. The smaller the
dot, the finer the coffee is ground.
Remember:
· a light roast requires a finer grind
· a dark roast requires a coarser grind
Try out the different settings to find
the one that best meets your personal
preference.
2.4 Using the cup-warming
function
Your fully automatic coffee centre
CafeRomatica is equipped with a
‘passive’ cup-warming function – the
operating heat of the machine is trans-
ferred to the cup-warm ing plate on top
of the machine to warm any cups
placed there (only when the machine
is turned on).
Model NICR 770 only:
This machine
is equipped with a high-quality ‘active’
Downloaded from CoffeeMachineManual.com Manuals
