Niviuk Vital OCTAGON, Руководство пользователя

Страница: 6 / 27

10 11
7.10 FLAKING THE PANELS
First, fold all the panels one by one to the right side of the suspension
lines. While doing this, check for any signs of damage or deterioration of
the fabric.
Then fold each panel to the left side of the suspension lines again one
by one; check carefully that each panel is laid flat and without creases.
Check the main seams and inside the panels as well.
Make sure that all the skirts are even and all the loops lie in the same
direction. (
Image F )
Fold both corners at a 45° angle. The skirt edges should be folded in
line with the wind channel but should not overlap it. (
Image G )
Fold 1/5 of the canopy from the right and 1/5 from the left toward
the center. Fold 1/3 of the canopy to the left, and fold another 1/3
to the right side. Then, fold the right half of the canopy onto the left.
(
Image H )
Fold so that the finished width of the folded canopy is the same from
at the top as at the skirt (bottom). (
Image I )
Fold the canopy in an accordion or “S” shaped folds, so that it fits into
the inner deployment bag. If possible, adjust the folds so that those
at the skirt are slightly narrower and those at the top of the canopy
are slightly wider. The OCTAGON rescue fits well if there are 4 folds.
(
Image J and K )
7.11 PACKING INTO THE DEPLOYMENT BAG
Stow the canopy in its “S” pattern so that the skirt is at the top of the
deployment bag. (
Image L )
ES ENG
F
H
J
L
K I
G