2
1
4
3
10
You can find a tutorial on correctly installing parachutes in our harnesses on our Youtube channel:
*Please note: the parachute must be fitted inside the container. In case the parachute is too small
and to avoid movement, foam must be incorporated to solve this problem. If it fits too loosely in
the inner container there is a possibility that it may twist or that the lines or webbing may not be
positioned correctly, which may make it difficult or impossible to deploy the parachute.
TAKE CARE: your safety depends on the correct installation of your emergency parachute.
This process should be performed with utmost care. We recommend the parachute is
installed by qualified professionals.
Installing the parachute
Ready the deployment bag and the parachute
handle. Below you will see how to connect
them.
To connect them, the loop at the end of the
handle strap must be inserted through the
attachment loop on the parachute container.
Pass the parachute handle through the loop
to form a lark’s foot/clove hitch.
Tighten the knot by pulling firmly on the
handle.
Check that the Y-bridle on the harness is
free of twists and tangles.
