Thermo Scientific AquaSensors
™
AnalogPlus
™
Dissolved Oxygen Sensor (ppm) User Guide
11
3.3.
Side Wall Immersion Mounting
Standard immersion mounting hardware is used to rigidly mount a sensor on the sidewall of a vessel. It is
usually secured with U-bolts (customer supplied). The mounting assembly consists of a seven-foot pole with
an integral junction box. Different pole lengths can be configured on request. To remove the sensor, the
hardware must be lifted out of the tank and laid down on the walkway. The pole protects the sensor cable
from damage.
Junction Box for sensor and extension cable
wiring to AV88 Universal Analyzer.
Standard 7 foot PVC pipe extension to place
sensor into tank. Pipe protects sensor cable from
damage.
Adapter to connect the sensor to the extension
pipe. This may or may not be needed depending
on the type of sensor.
AnalogPlus sensors are threaded on to the 1-
inch NPT thread adapter.
AV88 Universal Analyzer connects
to any AnalogPlus sensor.
Relays can be used for sensor
head wash control hardware.
Two current outputs can be used
for reporting dissolved oxygen and
temperature data.
Figure 3.3: Immersion Mount Illustration
