23
NIVEO PROFESSIONAL NW-ER3 User’s Manual
2-4-1 AP Mode
This is the most common mode. When in AP mode, this access point acts
as a bridge between 802.11b/g/n wireless devices and wired Ethernet
network, and exchange data between them.
When you select ‘AP’, the following options will be displayed:
Here are descriptions of every setup item:
Band
Please select the wireless band you wish to use. By
selecting different band setting, you’ll be able to
allow or deny the wireless client of a certain band.
If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G),
only wireless clients using the wireless band you
select (802.11b, 802.11n, or 802.11g) will be able
to connect to this access point.
If you select 2.4GHz (B+G), then only wireless
clients using 802.11b and 802.11g band will be
able to connect to this access point.
If you want to allow 802.11b, 802.11g, and
802.11n clients to connect to this access point,
select 2.4GHz (B+G+N).
Main ESSID
Please input the ESSID (the name used to identify
this wireless access point) here. You can input up
to 32 alphanumerical characters.
PLEASE NOTE
