6
1. AC input
2. Network /Fax/Modem Surge Protection(option)
3. Input circuit breaker
4. EPO(option)
5. USB communication port(option)
6. RS-232 communication port
7. SNMP intelligent slot (option)
8. Output receptacles
9. Battery Terminal
10. Output Terminal
2-3 LCD control panel
LCD control panel introduction
（
1
）
LED
（
from top to bottom: “alarm”, “bypass”, “battery”, “inverter”
）
（
2
）
LCD display
（
3
）
Selectbutton:enter to next item
（
4
）
Off button
（
5
）
On button
2-4 Setup the UPS
Step 1: UPS input connection
Plug the UPS into a two-pole, three-wire, grounded receptacle only. Avoid using extension
cords.
For 200/208/220/230/240VAC models: The power cord is supplied in the UPS
