Nivel System NL500, Руководство пользователя

Страница: 5 / 32

5
BATTERIES
The NL500 / NL500G used nickel-hydrogen batteries that can be recharged.
Charging the battery is done by the AC adapter (included in standard) - Use the connector on
the front panel of laser level.
Charging process is indicated by illumination of the LED. When the LED lights up green, the
charging process is
completed .
If it's necessary to replace the battery - battery compartment should be unscrewed..
Replacement batteries can be purchased from an authorized distributor.
Use lasers NL500 / NL500G with care, protect from moisture. Never put a wet instrument to the
transport box (wait until dry).
CONTROL PANEL
10 11
8 6
9 5
7, 4 1, 2, 3 12
Description of buttons and functions:
1) ON / OFF switch
- Turns the device on and off
2) LED declaring the power state of the instrument
- Lights red when the device is turned on
3) LED of discharged batteries
- While the LED is blinking, the batteries should be plugged in to charge.
4) LED of manual mode
- LED lights green when the unit is in manual mode
5) Adjusting the speed of head rotation
- available Head spin speeds: 0-60-120-300-600 rpm. Each press switches rotation speed.
6) Scan function button
- available angles of beam display: 0-10°-45°-90°-180°. Each press will switch the beam display
angle.