![Nitty-Gritty CLINOX REC Скачать руководство пользователя страница 34](http://html1.mh-extra.com/html/nitty-gritty/clinox-rec/clinox-rec_operating-manual_1696692034.webp)
34
5. PADS
INSTALLATION
Pads (
27
) of the Clinox REC are made of materials resistant to electrolyte solutions for pickling and high temperatures.
Pay attention:
Installation of the electrodes (
24
) is recommended to use gloves, especially if you have to replace
during a process to prevent burns. Before replacing the pads (
27
) need to disconnect the Clinox REC
from the mains.
Pay attention:
check the proper combination between the electrodes and cleaning pads (
Picture E
)
.
electrode for flat surfaces (
24a
)
+ internal collector for flat surfaces (
25a
)
+ MIG Bond pad for flat surfaces (
27a
)
electrode for external angles (
24b
) + internal collector for external angles (
25b
) + MIG Bond pad for external angles (
27b
)
electrode for internal angles (
24c
) + internal collector for internal angles (
25b
) + MIG Bond pad for internal angles (
27c
)
electrode for polishing (
24d
)
+ internal collector for polishing (
25d
)
+ MIG Bond pad for polishing (
27d
)
With the equipment unplugged from the mains.
Install Cleaning Pad (
27
) bending and blocking on the pins present on the electrode (
24
).
6. ELECTRIC INSTALLATION
Before connecting the machine, make sure that
:
there is the earth wire;
the system is in accordance with the unit capacity;
there are protective devices against all the overcurrents in case of overloads or short-circuits;
there are automatic cut offs according to type of grounding, in order to avoid any indirect contact;
electric cables, sockets and plugs making up the machine are in good state.
Therefore proceed to electric installation
:
1. Connect the plug of ground cable (
38
) into the socket (
14
) in the rear side of the machine.
2.
Put the clamp of the ground cable on the stainless steel work piece that has to be cleaned
.
3. Insert the plug of machine power cable (
15
) into a socket in compliance with the laws in force, by referring to the
rated voltage indicated on the rear panel of machine.
24
27
Pins for
pad fixing
Pins for
pad fixing
Содержание CLINOX REC
Страница 2: ......
Страница 6: ...6 A 7 6 5 B 8 2 1 3 4 B C D ON 38 39...
Страница 7: ...7 C D 14 15 16 13 16 18 17 12 11 10 9...
Страница 59: ...59...