7
6-2. MAGW-40 & MAG-70
Mounting
1 Hold the Driving Flange with Spanner supplied.
2 Insert the Outer Flange into the Grinding Wheel,
aligning the slot in the Outer Flange with the Key
in the Driving Flange.
3 Secure it firmly to the Spindle by tightening the
Wheel Lock Bolt with Hex. Socket Screw Key.
Removal
Hold the Driving Flange with Spanner and loosen
Wheel Lock Bolt with Hex. Socket Screw Key to
remove the Grinding Wheel.
Hex.Socket Screw
Driving Flange
Spanner
Grinding Wheel
Outer Flange
Wheel Lock Bolt
Fig.10
6-3. MAG-50
Mounting
1 Hold the Spindle with pushing the Lock Button.
2 Insert the Driving Flange into the Spindle to fit the
convex on the Spindle and groove of the Driving
Flange.
3 Insert the Grinding Wheel and Outer Flange into
the Spindle.
4 In case the thickness of the Grinding Wheel is
4mm or less, attach the Outer Flange up side
down.
5 Secure it firmly to the Spindle by tightening the
Outer Flange with Pin Face Wrench.
6 Secure Washer and Hex. Socket Button Head
Screw 6×15 firmly to the Spindle by tightening the
Socket Button Head Screw 6×15 with Hex. Socket
Screw Key.
Removal
1 Hold the Spindle with pushing the Lock Button.
2 Loosen the Hex. Socket Button Head Screw 6×15
with the Hex. Socket Screw Key and remove the
Washer.
3 Loosen the Outer Flange with the Pin Face
Wrench.
4mm or less
Lock Button
Spindle
Grinding Wheel
Driving Frange
Outer Flange
Pin Face Wrench
Washer 6.3x21x4.5
Hex.Socket Button
Head Screw 6x15
Hex.Socket Screw Key
Fig.11
7. HOW TO OPERATE THE TOOL
7-1. Start and Stop
To start, release the Lock Lever and grasp the
Throttle Lever.
To stop, release the Throttle Lever.
MAG-25B, MAG-50
Fig.12
MAGW-40,MAG-70
Fig.13
