Nitto ECB-0203, Инструкция по эксплуатации

Страница: 9 / 12

8
9. OPTIONAL PARTS
Part No. Description Qty
TB01159 Indexable Insert with Hole 12.7 10 pcs
TB01791 Indexable Insert 12.7 sq. R2 10 pcs
TB01651 Indexable Insert 12.7 sq. R3 10 pcs
TB02857 O.D.24mm Guide Sleeve 1 set
TB02862 Dust Box ※ 1 set
TB03097 Plate for Linear Purpose 1 set
※ The Dust Box should be mounted on the plate for
linear purpose when using.
9-1. How To Operate The Plate for Linear Purpose
The Plate for Linear Purpose is used for much more
stable linear machining.
Use the Hex. Socket Screw Key 4 (attached on the
plate Ass'y for linear purpose) to fix the Hex. Socket
Head Cap Screw of 2 pieces on the Circle Plate.
In this case arrange the position relation between
the Guide Sleeve (or Ball Bearing) and the Plate
for Linear Purpose so that they are positioned on
the same straight line as shown on the Fig.15.
Since the position reletion between the Plate for
Linear Purpose, Sub Handle and motor may vary
depending on the chamfering amount, select the
appropriate easy-to-operate position when mounting
them.
Fig. 15
9-2. How To Operate The Dust Box
●
The dust box Should be mounted on the Plate for
Linear Purpose, but cannot be mounted directly
on the Circle Plate.
Use the Hex. Socket Screw Key 4 to fasten the two
pieces of Hex. Socket Head Cap Screw on the Plate
for Linear Purpose. Clear away the cutting chips
accumulated in the Dust Box as far as possible. (Fig.16)
Fig. 16