background image

5

4. OPERATION

4-1. Mounting / Removing the file

 (Fig. 2)

Warning

 Always turn off the air supply and disconnect 

the air supply hose.

Mounting

Insert the file shaft into the Holder and tighten the Hex. 

Socket Set Screw with the Hex. Wrench Key until the 

file is securely fixed.

Removing

Loosen the Hex Socket Set Screw with the Hex. 

Wrench Key and take it out.

File

Holder

Hex. Socket Set Screw

Hex. Wrench Key

Fig. 2

4-2. Start and Stop 

(Fig. 3)

Warning

To start : Turn the Valve Ring clockwise a and match 

” to “

” on the Housing.

To stop : Turn the Valve Ring counterclockwise and 

match “

” to “

” on the Housing.

Housing

Valvering

Fig. 3

4-3. Operation

Warning

 Always wear eye protection during operations.

 Start the operation and press the tool slightly to 

the workpiece. 

Even if the tool is strongly pressed, 

the filing efficiency cannnot be improved.

4-4. How to use the Sanding Pad (Optional 

Accessories)

 (Fig. 4)

(1)

  

Attach the Abrasive Paper on the sponge of 

Sanding Pad and fix it with the Paper Clamp as 

shown on the figure 4.

(2) 

 

Mount the Sanding Pad in the same menner as the 

one for the file and carry out operation.

(3) 

 

Cut the locally available the Abrasive Paper into 

20mm × 190mm size and use it.

Note: The Sanding Pad may cause the larger vibration 

of the tool than the one caused by the file. 

Sponge

Abrasive paper

Hang the A point of
Paper Clamp to the Shaft

Hang it to the shaft

Paper Clamp

A

Fix the Abrasive paper
on the sponge

Fig. 4

4-5. Storing Tool

Warning

 When tool is not used, store it out of reach of 

children.

When the tool is not used, store it in a dry area.

If the tool is left alone as it has been used without 

preparation for storage, ambient moisture will remain 

inside the tool, which will leave it susceptible to 

rusting.  After finishing your work, add the machine oil 

#10 through the Air Hose and run the tool for a while 

before storage.

5. THREAD SIZE OF HOSE FITTING

The product comes with a metal fitting with PT 

thread. Connect the Bushing PT thread X NPT thread 

containing standard accessories. If you would like to 

have American NPT thread.

6. OPTIONAL PARTS

In addition to standard accessory parts, the following 

parts are available for your application and needs.

Part No.

Part Name

Q’ty

TA9A222

Rat Tail File SF-10

5pcs.

TA9A223

Triangular Taper File SF-11

5pcs.

TA9A224

Half Round File (Rat Tail /

Double Cut) SF-12

5pcs.

TA9A225

Flat Bastard File SF-13

5pcs.

TB03887

Sanding pad Ass’y

1set.

7. ORDERING PARTS

When ordering parts from our agency, plesase be sure 

to give them part number, part name and quantities.

Содержание ASH-800











Отзывы: