background image

5

Fig. 2

CAUTION

Always keep the inside of the Dust Connection 

Hose Clean. Accumulated dust inside of the 

Hose will decrease not only the efficiency of 

dust connection but also the performance of the 

tool itself.

4-3. Thread Size of Hose Fitting

The product comes with a metal fitting with 

Rc(metric) thread. Connect the Bushing R thread x 

NPT thread included as standard accessories, if you 

would like to have American NPT thread instead.

5. ATTACH ABRASIVE PAPER

WARNING

Always turn off the air supply and disconnect the 

air supply hose beforehand whenever replacing 

Abrasive Papers.

Put the Abrasive Paper on the Pad so that the paper 

holes and pad holes will properly align. Misalignment 

of those holes will decrease the performance of dust 

collection.

Abrasive Paper 

Fig. 3

6. HOW TO OPERATE THE TOOL

6-1. Start and Stop

To Start: Hold the tool and press the Throttle Lever. 

To stop: Leave the hand off the Throttle Lever.

Fig. 4

6-2. Speed Adjustment

WARNING

Be sure to keep hands clear of moving parts.

The Speed can be adjusted with a Regulator. 

Select a desired Speed by adjusting the Regulator. 

Maximum Speed: Turn the Regulator dial clockwise

Minimum Speed:  Turn the Regulator dial 

counterclockwise

Fig. 5

6-3. How to Operate

After the tool is turned on, slightly press the material 

to be ground during operation.

7. REPLACING THE PAD

WARNING

Always turn off the air supply and disconnect the 

air supply hose beforehand whenever replacing 

the Pad.

Tighten the Pad securely. Insufficient tightening 

of screws may lead to unintended accidents.

Содержание APS-125











Отзывы: