Nitto AJC-16, Инструкция по эксплуатации, Страница: 8 / 18

7
Fig. 8
(4) Extract the Needles. Whenever the Needles are
damaged during operation, they must be changed.
(5) After changing Needles, assemble in the reverse
manner of disassembly.
5-3. JEX-28
(1) Unfasten the Hex. Socket Head Cap Screw 8X24
of the Needle Guide with the Hex. Socket Screw
Key 6 and pull out the Needle Guide.
Needle Guide
Fig. 9
(2) Remove the Lock Band from the groove.
(3) Loosen the Lock Ring and remove. Take out the
Needle Supporter by pulling out the Needles.
Needle
Fig. 10
(4) Extract the Needles. Whenever the Needles are
damaged during operation, the Needles must be
changed.
(5) After changing Needles, assemble in the reverse
manner of disassembly.
5-4. JEX-2800A
(1) To disassemble Needle Guide Ass’y, pull up
the Clamp Lever and remove the Clamp Spring
from the hook on the Guide. Take out the Needle
Guide from the tool body. (Fig .11)
&ODPS6SULQJ &ODPS/HYHU
Fig. 11
(2) Remove the Snap Ring by pinching the projected
hooks.
(3) Then you can take off the Needle Supporter
together with other parts by pulling out the edge
of Needles. (Fig. 12)
1HHGOH6XSSRUWHU
/RFN5LQJ
6QDS5LQJ
5LQJ
Fig. 12
(4) After changing with new Needles, reverse
assembly procedure.
Caution : When you assemble the Snap Ring,
make sure it fits into the slot on the
Cylinder.
6. THREAD SIZE OF HOSE FITTING
The product comes with a metal fitting with Rc (metric)
thread. Connect the Bushing R thread x NPT thread
included as standard accessories, if you would like to
have American NPT thread instead.
7. STORAGE
CAUTION
●
When tool is not used, store it out of children.
Avoid storing the tool in a location subject to high
humidity. If the tool is left as it is used, residual
moisture on the inside can cause rusting. Before
storing, and after operation,
oil the tool at the air inlet with machine oil ISO
VG-10 and run it for a short time.
8. OPTIONAL PARTS
We can Supply 2, 3 and 4mm diameter Needles for
JET CHISEL.
Change Needles according to the type of your work.
Part No. Description Qty Model
TA98780 Needles O.D.2×
150mm
100pcs JC-16,AJC-16
TA98781 Needles O.D.2×
180mm
100pcs
TA9A213 Needles O.D.2×
300mm
50pcs JT-20,
TA9A214 Needles O.D.2×
500mm
50pcs JEX-20,
TA98782 Needles O.D.3×
180mm
100pcs JEX-24,
TA9A216 Needles O.D.3×
300mm
50pcs JEX-28,
TA9A217 Needles O.D.3×
500mm
50pcs JEX-2800A
TA9A218 Needles O.D.3×
800mm
50pcs
TA98782 Needles O.D.3×
180mm
100pcs AJC-16
TA98783 Needles O.D.4×
180mm
50pcs
JEX-28,
JEX-2800A
TA9A220 Needles O.D.4×
300mm
50pcs
TA9A221 Needles O.D.4×
500mm
50pcs
TP00338 Needle Supporter
O.D.2
1 JT-20,JEX-20
TP02244 Needle Supporter
O.D.2
1 JEX-24
TP01499 Needle Supporter
O.D.2
1
JEX-28,
JEX-2800A
TQ05210 Needle Supporter
O.D.2
1 AJC-16
9. ORDERING SERVICE PARTS
For further operational and handling information or
for replacement of parts and components, contact the
company from whom you purchased the tool or an
authorized dealer. In ordering parts and components
give each part number, part name and quantity
required. Use only NITTO genuine parts.
JET CHISEL.indd 7 11.2.18 2:12:31 PM