Professional tool
Pneumatic sander
Model: MYS-40
The end tool in the drawing is not included with the tool.
[Specifications]
Model
MYS-40
Maximum operating pressure
MPa
0.6
Air consumption (No load)
m
3
/min
0.45
Rated speed (No load)
min
-1
13700
Abrasive Disc (paper) diameter
mm
100
Mass (weight)
kg
1.1
Sound pressure level *1
dB (A)
82
Sound power level *1
dB (A)
93
Vibration level *2
m/s
2
≤
2.5
Thread size of Air Inlet
Rc 1/4
*1
Based on the ISO15744 measurement standard.
*2
Based on the 3 axes combined value measurement standard of the
ISO28927-3 of the hand-held tool frequency correction vibration
acceleration effective value.
Please read manual carefully before you attempt to use your tool so that you may use it properly
and safety.
Keep the manual handy - so you can use it whenever necessary.
• Due to continuous product development/improvement, the specifications and configurations in this
document are subject to change without prior notice.
INSTRUCTION
MANUAL
Manufactured by.
NITTO KOHKI CO., LTD.
9-4, Nakaikegami 2-chome, Ohta-ku, Tokyo, 146-8555, Japan
Tel : +81-3-3755-1111 Fax : +81-3-3753-8791
TQ15292-0 06/2017
(Original Instructions)
TQ15292-0̲MYS-40̲en.indb i
2017/06/14 15:28:52
