Technical Manual: EV-UV - 000023 (Changes are subject to DCRN)
Section 1 - INTRODUCTION
The
EV-UV
is an attractively-styled, low profile ultraviolet flame
sensor for use with Nittan 'evolution' protocol control panels.
The
EV-UV
utilises the ultraviolet light detection method.
EV-UV features:
• Ultraviolet sensor, detecting ultraviolet light emitted
by flames
• Low profile, stylish appearance
• Supplied with protective dust cover,(remove
during commissioning)
• Low monitoring current
• Remote indicator output
• Non-polarised terminals
• Compatible with UB-4-EV and STB-4SE-EV bases
Section 2 - SENSOR MODELS
The EV-UV ultraviolet flame sensor has two terminals for
connection onto the two wire loop. The remaining terminal
provides a switched current sink function which operates when the
detector goes into alarm condition, suitable for the operation of an
auxiliary function such as a remote indicator. Terminal 3 (RIL) is
limited to 3mA.
Section 3 - BASE MODELS
A variety of bases are available for use with the EV-UV sensor. It is
important to use the correct base for each application. The
available base models are:
i)
UB-4-EV base
: For standard use with EV-UV series ultraviolet
flame sensor.
ii)
UB-4SE-EV base
: Similar to UB-4-EV base, except deeper.
CONTENTS:-
Section 1
Introduction
Page 3
Section 2
Sensor models
Page 3
Section 3
Base Models
Page 3
Section 4
Location
Page 4
Section 5
Installation
Page 4
Section 6
Maintenance &
Page 5-6
Cleaning
Section 7
Specifications
Page 7
Section 8
Environmental
Parameters:
Page 7
- Temperature
Page 7
- Humidity
Page 7
Section 9
EMC
Page 7
Section 10
Connections
Page 8
Section 11
Dimensions
Page 8
Section 12
Area Coverage
Page 9-10
Section 13
Disposal
Page 11
Section 14
ROHS Compliance
Statement
Page 11
Section 15
Flameproof
Housing
Page 12
3
• Ref No: NISM/EV-UV/01 • Date: 16.04.09 • Issue: 1
• evolution advanced • EV-UV • analogue addressable ultraviolet flame sensor
instruction manual
