Nitta PP103, Руководство по эксплуатации

Страница: 4 / 16

- 3 -
Confirm that the power source used is within the designated
specifications of the Heat Press.
Use beyond the designated specifications may cause fire or electric
shock.
Specification Power Source Wattage Rating
For 100V 100V
－
110V 50/60Hz 248-300W
For 200V 200V － 220V 50/60Hz 248-300W
To prevent fire or electric shock, do not use the Heat Press under
the following conditions:
・
Under flammable gas or combustible gas environment
・
Under a corrosive gas environment
・
Under an ambient temperature of 5
℃
or below
・
Under an ambient temperature of 30
℃
or above
・
Under a high humidity environment. (Humidity surpassing 85%)
・
In places exposing the Heat Press to steam or water drops
Connect the main plug correctly to the socket outlet.
The power cable of the press uses an earth connection plug.
Connect the main plug correctly into an earth connection outlet to
prevent electric shock
.
Use a conversion plug when the plug shape does not match the
socket.
Failure to do this may cause electric shock.
The plug shape of the attached power cable is as follows. The
conversion plug is not attached. When a conversion plug is
necessary, users must provide their own.
Do not use the Heat Press on a flammable material.
Use of any other product may cause fire.
Impressed voltage is distributed in the power cable.
To prevent fire, electric shock or damage, please consider the
following.
・
Disconnect the main plug from the socket outlet with your hand.
・
Do not remodel or replace the main plug.
・
Do not place any object on the power cable.
・
Do not fold the power cable.
・
Do not pull or stretch the power cable.
Use a three-pin earth line as an extension cord.
When an extension cord is required, use an earth-connection type
extension cord to prevent electric shock.
Specification Plug type Plug illustration
For 100V A Type
For 200V NEMA6-15
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING