Nitta PolySprint FP30-10-100, Руководство по эксплуатации

Страница: 11 / 14

- 10 -
9-3-1) How to change the position of the cutting sheet - Continued-
②
Change the position of the cutting sheet by
sliding it forward or back in the hole on the belt
guide.
※
At the time of shipping, the cutting sheet is
set in the center of the hole on the belt
guide.
※
The picture at left shows an example of
sliding the cutting sheet forward in the hole.
Make sure it’s set at the very edge of the
hole.
※
Both sides of the cutting sheet can be used
and it can be set in any of the three
positions; forward, center and back.
③
Securely tighten the four loosened hexagon
socket head cap screws.
Belt Guide