13
♦
Answering Calls , Adjust Volume , Ending Call and Reject Call
When the Headset is powered on, and there
is an incoming call, you will hear a beep sounds, and also the green indicator will change to a quick-flashing mode.
(When the Headset is in stand-by, the blue indicator will be in a slow-flashing mode.)
1.
When the Headset rings, press the button to answer.
2.
Adjust the Headset volume by press the to increase the volume or Volume - to decrease the volume.
3.
End calls by pressing Volume - for 3 sec or don’t press any button.
4.
To Reject Call – Please press for 3 sec while the phone is still ringing.
When the Headset is powered off, press button for 3 seconds for an incoming call to turn on the Headset,
then press button again to answer/connect the incoming call.
Note！
Due to the different design of some mobile phones, an auto-disconnect may happen even when the Headset is
powered on. In that case, the Headset won’t ring when there is an incoming call. Press button for 1
sec. to reconnect the Headset with mobile phone for an incoming call.
14
♦
Mute
Press both and Volume - keys for one second in the same time for a Mute function. Press
or Volume - for one second to disable the Mute function.
Connect with a PC or PDA
You are allowed to connect the Headset with a Bluetooth enabled PC or PDA
that is with Audio Gateway Profiles supported.
♦
Low Battery
When the red indicator starts to flash, it indicates that the Headset is running low on battery.
Charge the Headset for 2 hours until the red indicator turns off.
