21
4. When my mobile was searching for the Headset, why did several Bluetooth devices appear on my mobile
phone?
A:
Most Bluetooth enabled mobile phones with Bluetooth function activated can search for more than one
Bluetooth device within operative range. The Headset will appear as “BT Headset” to “Unknown Device” on
your mobile phone after having been found by your mobile phone.
5. Why can’t my mobile phone find the Headset?
A:
If the Headset is not in pairing mode, your mobile phone won’t find the Headset. Please set the Headset into
pairing mode before starting your mobile phone to search for the Headset. (Please refer to the User Manual for
detailed instructions.)
6. Do I need to pair the Headset with my mobile phone every time I use it?
A:
No. Once the Pairing is set up between the two devices, they will remain paired even when one or both devices
are powered off.
22
TM
TM
7. Why is there a disturbance noise coming from the Headset?
A:
1)
Whether your mobile phone is in a good signal area. If your mobile phone is in week signal area, you won’t
hear clearly with the Headset.
2) Whether it is in the operative range.
8. What should I do when I can’t hear very well with the Headset?
A:
Adjust the sound volume on your mobile phone, or press the S1 button of the Headset to increase volume,
or check if your mobile phone is in a good signal area.
9. Why doesn’t the Headset work suddenly?
A:
1) The headset may have run out of battery. When it is in low battery, a red LED will start to flash.
2) Some Bluetooth mobile phones, which have a problem with the Bluetooth implementation, will
occasionally but not often, get into Bluetooth shut-down status in unpredictable circumstances. When this happens,
please reset your mobile phone by removing the battery. (it is not necessary to do the Pairing again.)
