400W
E-scooter Main Parts
Quick Fold Systerm
Lock/Release S Button
3D Reflector
Footboard And Footgrip
Rear Disc-brake
Battery Charge Interface
Maintenance of flat tire
1. Make sure the escooter is unplugged and powered off.
2. Place escooter on a high stable surface where it is placed only on it' s
body ,so that rear and front wheels will be in the air.
3. Use tools open both rear plastic covers
4. Easy Take the motor cable out from right of escooter
5. Use 15-18 hex to disassemble motor nuts and motor.
6. Remember the exact arder and place of washers on each side of the motor.
7. Used professional spoons (not plastic or small ones)to dismount tire from
motor, be careful not to damage the motor, rim,tire and tude, use liquid soap
around the rim to tir slid out of the rim .
8. Fix or replace tube
9. Put the ire back in place. Use liquid soap around the rim to put the tir back in
place . Do not use any tools for placing back tir on the rim, use hands only.
1 O.Check that your repair is completely done by pumping air to 45 psi. lnto the
wheel .
11.ln arder to put escooter back together do all the steps in reverse arder.
Nake sure the escooter is unplugged and powered off
.
Page 04
Page 29
