2015+ Dodge Challenger Switch Panel Installation
PART NUMBER: 00-11045
I N S T A L L A T I O N I N S T R U C T I O N S
W W W . N I T R O U S O U T L E T . C O M / I N S T A L L A T I O N - G U I D E S
N I T R O U S O U T L E T | 3 0 5 S O U T H 2 8 T H S T R E E T | W A C O , T X 7 6 7 1 0 | P : 2 5 4 - 8 4 8 - 4 3 0 0 | W W W. N I T R O U S O U T L E T. C O M
IMPORTANT- ALL APPROPRIATE SAFETY EQUIPMENT (GLOVES, TOOLS ETC.) MUST BE USED DURING THE INSTALLATION OF THIS PRODUCT(S). NITRO DAVE’S LLC ACCEPTS NO
RESPONSIBILITY FOR INJURIES RESULTING IN THE INSTALLATION OF ANY PRODUCT(S). NITROUS OXIDE IS FOR OFF-ROAD USE ONLY.
©N2O112619
Step 9:
Pull the wiring for your switch panel through to the cap holder.
Step 8:
Use a drill and a bit to drill a pilot hole and then use a hole
saw bit 1’’ in the cup holder for your switch panel wiring.
Step 10:
Reinstall your console panels and your shifter .
Connect your wires according to the diagram in this
installation manual. After you make the connections, carefully
push the panel down into the cup holder console, making
sure that no connections to the switch panel come loose.
