niteo JS0153-22, Инструкция по эксплуатации

Страница: 34 / 38

34
Correct and regular cleaning will improve the safety and extend the lifespan of the device .
Warning! Turn the device off, disconnect it from the mains and wait until it cools down before
cleaning or maintenance to avoid burns .
Protective features, ventilation openings and the motor housing should always be free from dust and other
contamination .
Wipe the device with a damp cloth or blow it down with low-pressure compressed air .
It is recommended that you clean the device immediately after every use .
Protect the interior of the device from water penetration .
Do not immerse the device or parts of it in water or other prisms .
The cutting parts must be sharp and kept clean . Properly maintained cutting elements that are properly
sharpened, adhere better to the surface and provide better cutting control .
Attention!
Do not use any chemical, alkaline, abrasive or disinfecting substances to clean the device, as
they can damage its surfaces.
The device does not contain user-serviceable parts . Do not attempt to make any repairs . Always have a
specialist perform repairs .
If the power cord is damaged, it has to be replaced with an identical one by the manufacturer, service or a
qualified person to avoid danger.
a) Clean the device in accordance with the instructions . It is recommended that the device be stored in its
original packaging .
b) Always store the product in a dry and well-ventilated room, beyond children’s reach .
c) Protect the device against vibration and shock during transportation .
8 CLEANING AND MAINTENANCE
9 REPAIR
10 HANDLING AND STORAGE
11 DISPOSAL
Keep the packaging materials out of children’s reach, as the materials can pose a hazard .
The packaging should be disposed of in accordance with local regulations .
Correct disposal of the device:
1 . According to the WEEE Directive 2012/19/EU, the crossed-out wheelie bin symbol is used to
label all electric and electronic devices requiring segregation .
2 . Do not dispose of the spent product with domestic waste: hand it over to an electric and electronic
device collection and recycling centre .
3 . Hazardous components in electronic and electrical equipment have a negative impact on the environment
and human health .
4 . Plastics contained in the device can be recycled in accordance with the specific marking. By recycling
materials and spent equipment you will help to protect the environment .