niteo JS0153-22, Инструкция по эксплуатации

Страница: 32 / 38

32
7.4 Stroke rate adjuster
It is possible to adjust the blade stroke rate . Rotate the stroke rate adjuster to select one of the settings
from 1 to 6 .
7.5 Guide foot plate bevel adjustment
To adjust the guide foot plate bevel, unscrew two Allen screws on the bottom of the device using the Allen
key (included) .
The jigsaw with laser can be set at 45, 30, 15 and 0 degrees . The base has teeth which facilitate its locking .
For this reason, when adjusting, move the base slightly backward, set the required bevel, and then slide it
forward to lock . Screw the Allen screws back .
Allen key
Allen screws Teeth
7.6 Blade pendulum action adjustment
It is possible to adjust the blade pendulum action in the range from 0 to 3 . At “0”, the blade will not perform
additional pendulum action forward, which allows for easier cutting . At “3”, the pendulum action will be the
highest . Adjust the blade pendulum action depending on the hardness of the material being sawn . You can
cut soft materials more aggressively by setting the blade pendulum action adjuster to “3” .