NITEO TOOLS
EN
7
CONSTRUCTION AND ASSEMBLY
To assembly you will need a Philips type screwdriver (not included) and 10 and
13 spanners.
A.
Fasten the cross-piece (3) to the frame of the base (4) using M6 screws (9),
∅
13x6 mm washers (10) and M6 nuts (11).
B.
Attach the work top (1) to the vices (2) using wood screws (12).
C.
Place the vices on the frame, match the holes in the vices to the holes in the
frame and thread the M8 screws (6) on the outside of the frame through
them. On the inside, apply a washer
∅
16x8 mm and screw on the M8 nut.
D.
Attach the plastic feet (5) to the frame legs.
E.
Mount grips (13) into the holes in the worktop as needed.
