28
USING THE DOME’S ADVANCED FUNCTIONS-
On Screen Graphics (OSD) –
The PTZ630 series boasts eight patrol (tour) options, one auto scan option and four record
pattern options. All these can be configured using the OSD. To bring up the camera menu
press <
CALL> 95 <Enter>
or
<SHOT> 95
<
Enter
> (varies with module type)
.
The OSD is then displayed on the screen. You can navigate between the various options using
the Joystick control – up to increase and down to decrease – IRIS+ to enter and IRIS- to exit.
You need to use the OPEN or IRIS+ button to be able to edit changes and again to close edit.
THE MENU SYSTEM
Tt
Using the Menu System.
This menu system allows the user to alter the dome menu instruction options and settings using a
control keypad. This first page shows the initial main menu page and only describes the general
functions. The following pages show the main menu option selected on the left hand side of the page
and a breakdown of that menu page on the right hand side of the page.
MAIN MENU
To enter the main menu system press
<CALL> 95
<
Enter
> or
<SHOT> 95
<
Enter
>
on the Keypad.
Use the Joystick control pan up or pan down to select a menu,
the Open or IRIS+ to select and edit a value, the joystick up or
down to change a value, the Open or IRIS+ to close the edit and
the CLOSE or IRIS- to exit the menu.
DESCRIPTION OF MENU OPTIONS
System Information:
Displays System Information – Communication Protocol – Baud Rate -
Hard ID / Soft ID / Soft address enabling - Camera Type - Internal Temperature - Software Version.
Display Setting:
Information tips - PTZ display – Alarm display.
System Setting:
Camera – Movement Control – Preset - Patrol – Pattern – Alarm – Remove.
IR LED Setting:
Control Mode – LED ON Level – LED OFF Level – Brightness – Current Level.
Restart Camera:
Restart Camera - Sure?
Reset:
Reset Menus - Sure?
Exit:
To exit menu.
Main Menu
System Information
Display Setting
System Setting
IR LED Setting
Restart Camera
Reset
Exit