10
Open Mode (only works with Air 10s)
1. Press the OPEN button on MG10 to switch on Open mode. Pilot light on
which means Open mode is on.
Open Mode Setting
2. Hold the button of Nissin Air 10s for 1 seconds,
the word “
OPEN
" lights up on the top of in the LCD display which means
Open Mode is on. Now hold the for 1 seconds again to turn off.
The NAS system is using an independent identity (ID) function to access
strobes, the NAS strobes will not be affected by other commanders when-
ever they are using the same channel in the same location. A slave unit of
Nissin flash or Nissin receiver can only be controlled by one and only one
NAS commander with pairing in default setting.
MG10 offers “Open Mode” ,a new function (only works with Air 10s), on the
pairing setting. Open Mode can let two or more camera using same set
MG10 in one place.
Содержание MG10
Страница 1: ...INSTRUCTION MANUAL ...
