Mounting i60A on the camera
Removing i60A from the camera
Press the unlock button and slide the mounting
foot of i60A off the hotshoe of the camera.
Turn on the flash unit
For a test flash, press the Pilot button.
To turn off the flash unit manually, press
the On/Off switch once.
Press the On/ Off switch and Pilot button
turns red, showing the unit is turned on.
In a few seconds, the Pilot button turns
green. The i60A is ready to shoot.
Slide the mounting foot of i60A into the
hotshoe of the camera.
Make sure that the mounting foot will lock
(with a “click”) when it has been inserted
completely.
1.
2.
2
1
6
