Set the camera for flash shooting mode. Point at the subject and
shoot. The slave flash will synchronize to the master flash and
gives additional lighting from the different direction you desired.
Shooting the subject
15
If the flash unit sleep after 5 minutes of idle, simply press any
button on the master flash to wake up the flash unit again.
Automatic shut off function is however in effect. It automatically
turns-off when not in use for over 60 minutes.
The zoom setting position is
automatically set for the focal
length of 35mm (18mm) while
using i60A as a slave unit in
SD, SF, and Optical wireless
mode.
i60A supports shutter speeds up to 1/8,000 second.
In A, M, TTL mode:
Enable on i60A
ON:
Hold the button for 1 second to activate or,
OFF:
Hold the button for 1 second to deactivate.
In Wireless Remote Mode - Optical Transmission:
Enable High-speed sync on Master Unit.
In Wireless Remote Mode - Radio Transmission (NAS)
Enable High-speed sync on Commander (please refer to NAS
Commander user’s manual).
High-speed mode use higher flash energy. To protect the flash
from overheat. The recycling time will be extended to a minimum
7 seconds.
HSS High-Speed Synchronization
