The NAS system is using an independent identity (ID) function to
access strobes, the NAS strobes will not be affected by other commanders
whenever they are using the same channel in the same location.
A slave unit of Nissin flash or Nissin receiver can only be controlled by
one and only one NAS commander with pairing in default setting.
Air 10s offers “Open Mode” ,a new function (only works with MG10),
on the pairing setting. It lets strobes paired to the NAS system to be
wirelessly controlled by two or more NAS commanders at the same time.
Turn on the open mode on all NAS strobes, then one or more commanders
can be used to wirelessly control the slave units without pairing.
13
Open Mode (only works with MG10)
1. Hold the button of Nissin Air 10s for 2 seconds,
the word “
OPEN
" lights up on the top of in the LCD display which means
Open Mode is on. Now hold the for 2 seconds again to turn off.
Open Mode Setting
