Nissin Digital MG60, Инструкция по эксплуатации

Страница: 13 / 15

TTL flash power compensation
With the latest TTL flash control system, the flash power level is always
automatically controlled by the camera for the most appropriate
exposure. If you wish, you can soften or weaken the flash light, or give
more light to the subject without changing the environmental or
background exposure effect. The MG60 can make it possible to quickly
adjust the exposure for each particular flash picture as needed.
• Set MG60 to the camera’s hotshoe and
press the on/ off switch to power on.
• Rotate the Function dial to mode.
• To set the Flash power compensation
level rotate the Control wheel to
the power level you desire.
• TTL flash power compensation is provided in
12 steps by 1/3 Ev increments for
-2.0, -1.7, -1.3, -1.0, -0.7, -0.3, 0,
+0.3, +0.7, +1.0, +1.3, +1.7 and +2.0 Ev.
• Take a picture and the subject is shown with required lighting effect by
keeping the background exposure level as originally expected.
• On some cameras, the TTL flash power compensation setting is
provided in its menu mode. When setting the TTL flash power
compensation on your camera, any compensation which is also set on
the MG60 will be counted in addition to the compensation you selected
in the camera’s menu mode.
( i.e. Having a +1 compensation set on the flash and a +1.3
compensation set in the camera would yield a total compensation of
+2.3 EV.)
Mode dial
12