![background image](http://html1.mh-extra.com/html/nissen/multi-light-cascade-220-led-l8h-670-1/multi-light-cascade-220-led-l8h-670-1_operating-instructions-manual_1695989015.webp)
© 2012 Adolf Nissen Elektrobau GmbH + Co. KG
ENGLISH
Multi-Light Cascade 220
16
2.3
Construction and function
Consisting of 1 master lamp and 9 slave lamps, each lamp connected to another by cable.
Multi-Light Cascade 220 LED L8H consists of two different lamp types, master lamp and slave lamp.
One master lamp and up to nine slave lamps are needed for one cascade unit.
The system can be used for day/night operation or with an automatic dimming switch day off / night on
(see configuration of dip switches).
Multi-Light Cascade 220 LED L8H can be operated with 12 volt or 24 volt.
The system switches off at a voltage below 10,5 volt resp. above 30 volt in order to protect battery and
lamps.
A clamp is mounted to the rear side of each lamp to enable mounting e.g. at beacon systems.
2.4
Mounting
Mounting instructions
The master lamp is equipped with 5 m cable with battery clips and a connector socket for slave lamps.
Each slave lamp is equipped with 12 m connecting cable with plug and a connector socket for further
slave lamps.
The first slave lamp is connected to the socket of the master lamp. It must be protected against
unintentional removal by turning the knurled screw.
All further slave lamps are connected to the previous slave lamp and must also be protected against
unintentional removal by turning the knurled screw.
Up to 9 slave lamps can be put in a row so that a complete cascade system of up to 10 lamps arises.