Nissei GTR-AR APQ Скачать руководство пользователя страница 15

6.Warranty

1. Warranty Term

2. Scope of Warranty

1) The scope of our warranty is limited to our manufacture.
2)

3. Exception for Warranty

1)

2)

3)

4)

5) secondary failure caused by the damage of customers equipment.
6)

7)

8)

9)

In case that any failures on the product by which proper functions of the
product cannot be obtained arise during the above warranty term, although
the product is properly operated under the condition that the product is
properly installed in, connected to the machine, treated (including
inspection and maintenance) in accordance with this Instruction Manual, we
will provide appropriate repair on the product free of charge, except as
stipulated in the Exception for Warranty as described below.

any other troubles, problems or damages on the product which are not
attributable to our product liability.
We are not responsible for the compensation against the loss of shutdown
and/or for the damage to the equipments which are not produced by us,
caused by the interruption of operation of our product.

any repairs to the losses or damages caused by the disassemble,
modification, change of parts or the substituted product delivered which
are rendered by customer.

any losses caused by the parts, driving units (examples: electric motor,
servomotor, hydraulic motor, etc.) which are supplied by customer.
improper storage and maintenance of the product, or improper handling of
the product.

disaster (earthquake, thunder, fire, flood, etc.) or human error such as
wrong operation of the product.

customer's improper operation of the product not in conformity with the
rated data specified in our catalogues or the specifications mutually agreed.
any failures in the transmission part to customer's equipment (alignment of
the shaft when coupling with other machine, etc.)

This warranty shall not be applied to the problems, troubles or damages on the
product which are caused by:

The warranty term for the product shall be 18 months after the date of
delivery or 12 month from the product starting operation, whether be
shorter.

14

Содержание GTR-AR APQ

















Отзывы: