NIPPY NP-S7B Ski-mini, Инструкция по эксплуатации

Страница: 10 / 16

8
( 9 ) Fuse replacement
①
Turn off the main power and unplug the power cord.
②
Pull out the fuse holder of the power jack.
③
Replace a new fuse, assemble in the reverse process.
Use a commercially available 5A, 250V miniature glass tube fuse.
（
φ5.2×20
ｍｍ）
➢
The fuse holder is attached in a spare fuse.
（
10
）
Operation switching between run switch and foot pedal
There is operation switching between run switch and foot pedal on the back of the main unit.
The upper side is the foot pedal, and the lower side is the run switch.
(Precaution)
Note that when switching to the foot pedal, if you hold down the pedal, it will start moving
immediately.
Note that if the power switch is operation mode, it will start moving immediately when you
switched it.
【
Stop the back switch
⇒
Operation
】
power jack
fuse holder
fuse
main power
fuse holder