15
09
HEATER BROKEN(H1)
The temperature of H1
does not rise.
Issued if the temperature of the H1 is not 400
°
C or
more at the end of “TRANS”.
If the error reoccurs after the instrument is turned off
and restarted, contact us.
10
HEATER BROKEN(H2)
The temperature of H2
does not rise.
Issued if the temperature of the H2 is not 400
°
C or
more at the end of a measurement.
If the error reoccurs after the instrument is turned off
and restarted, contact us.
20
FLOW ERROR
Flow rate is not enough.
Issued if the flow rate decreases to 0.2 L/min. or less
during a measurement.
Make sure that the pump is operating and that any tube
has not been disconnected.
