D-F10072 NP-K3053/K2053 Product Specifications Rev.1.00
21
2) Memory Switch MS2
Factory Setting
Function O
N
OFF
NP-K3053D
NP-K2053D
NP-K3053U
NP-K2053U
MS2-1 Japanese Kanji code
Shift JIS
JIS
OFF
OFF
MS2-2 Reserved
–
–
OFF
OFF
MS2-3 Reserved
–
–
OFF
OFF
MS2-4 Paper NE detection
IN VALID
VALID
OFF
OFF
MS2-5
Receive buffer remaining
size auto-reply (USB)
*NOTE1
INVALID
VALID OFF OFF
MS2-6
Paper NE detection
outer diameter value
*NOTE2
OD26mm OD22mm
OFF OFF
MS2-7 Reserved
–
–
OFF
OFF
MS2-8 Reserved
–
–
OFF
OFF
*Make sure to turn OFF MS2-2, MS2-3, MS2-7, MS2-8.
*NOTE1
: In case of setting MS2-5:ON, beware since print failure such as garble character
etc. may occur when transmitting large volumes of data at one time.
VALID only when USB interface.
*NOTE2
: In case of setting MS2-6:OFF, the near end happens after executing paper feed
of approx. 2.3m from a position where the near end sensor detects.
Except, if the near end is detected right after the power ON or right after loading
new paper roll after the near end happens, the near end is effective at that time.
This value is rough indication. Since the detective value fluctuates depending on
the condition of the paper, please treat as reference value.
