Manual <GP-08LED>
NIPPON Genetics EUROPE GmbH
Mariaweilerstraße 28-30 | 52349 Düren | Germany
www.nipppongenetics.eu
Tel.: +49 (0) 2421 55 496 0
Fax: +49 (0) 2421 55 496 11
[email protected]
[email protected]
10
Installation Guide
–
Setting up the FAS-DIGI Compact
Place the unit on a level surface with minimal chance of dropping.
1.
Place the Darkbox on top of the Transilluminator
2.
Place the camera with its aluminum adapter in its final position, by adding it to the hole in the
top part of the Darkbox.
3.
Add the Battery to the camera. Please note that only one direction is possible.
4.
Close the battery compartment completely. Please note: the camera will not turn on if the
battery compartment is not completely closed.
5.
Align the camera, so that the image of the position is straight. The control buttons should be
facing toward the door of the Darkbox.
6.
Connect the power cord of the transilluminator with a power socket.
The FAS-DIGI Compact is now powered and set up. The transilluminator should be turned on by
using the switch.
Setting up the camera
Preparation:
•
The camera is used manually, so you can use all the available settings which are
described in the manual of the camera.
•
Recommended camera settings:
o
Focus set on AF
o
Image stabilization: Off
o
Setting wheel: P
o
Exposure compensation: -1
o
Please note: The exposure compensation will be set back to 0 after switching
off the camera.
Y
ou completed the installation of the FAS-DIGI Compact. Please continue with the IQ/OQ/PQ
protocol.
WELL DONE!
