Nippon Genetics FASTGENE ELECTRONIC PIPETTE-10, Руководство пользователя

Страница: 6 / 36

NIPPON Genetics EUROPE – www.nippongenetics.eu
6
6.
The pipette has three modes where advantages of electromotion are utilized. (Refer to
“
9. FUNCTION
AND HOW TO USE
”
)
1. Standard mode (AUTO)
This is for basic pipette operation. In this mode, the pipette aspirates once and then
dispenses once.
2. Dispensing mode (MD)
This is for dispensing liquid on a microplate, etc. In this mode, the pipette aspirates once and
dispenses several times.
3. Mixing mode (MIX)
This is a useful operation when uniformly mixing liquids of different types. In this mode, the
pipette repeats a cycle of aspirating and dispensing.

User setting allows storage within the pipette of up to nine programs containing operating
mode and dispensed volume. By reading them out when necessary, operation for setting
again can be omitted. Settings from the prior use are stored in memory even with the power
turned off.

The pipette is equipped with the reverse operation suitable for dispensing a liquid that has a
tendency to remain in the tip. (Refer to “9-6 Reverse operation (Dispensing liquid that tends
to remain in the tip)”)

The pipette also has
“
Dispensing correction function
”
(Patent applied for) with multiple
dispensing to cancel errors due to backlash. It enables the dispensing of liquids precisely
without difference due to operators. (Refer to
“
9-9
“
Dispensing correction function” for
multiple dispensing”)

Various kinds of tips can be used. (The height of the tip ejector can be adjusted) (Refer to
“
12.
ADJUSTING HEIGHT OF THE TIP EJECTOR
”
)

Calibration (adjustment) of dispensed volumes is easy. (User CAL function). Even differences in
dispensed amounts due to tip differences can be corrected. (Refer to
“
11-1 Volume
calibration function (
μ
L calibration function)
”
) (Patent applied for)

Dispensing by weight is also available. Refer to
“
11-3 Dispensing in a unit of weight (in mg
unit)
”
) (Patent applied for)