Nipon Coolair MB12 GA, Инструкция по установке и эксплуатации

Страница: 30 / 44

(3). If gap still exists between ceiling and decoration panel after tightening the screws, readjust
the height of the indoor unit. (Fig.3 )
Fig.3
Fig.3 (4).
Fig.3
.5.2 Installing the Panel
(1). .
(2). Latch other two hooks.
(3). Tighten four hexagonal screws under the latches about 15mm.
(4). Adjust the panel along the direction indicated by the arrow as shown in Fig.3 .
(5). Tighten the screws until the thickness of the sealing material between the panel and the
indoor unit reduces to 5-8cm.
Cassete - Multi-Split