10
Warning
1. Do not use the respirator as protection against toxic particle, gas, vapor or
solvent from spray-painting operation. Those who have difficulty breathing must
take caution when using the respirator to ensure that their ability to breathe is not
further hindered by wearing the respirator.
2. Do not use the respirator in enclosed space, tank, inadequately ventilated
area, oxygen-deficient environment (<19.5% in volume), hazardous environment,
or in any circumstance where toxic gas is likely to be present.
3. Do not use the respirator when the concentration of contaminant is
dangerous for life or health. The concentration, toxicological characteristics and
type of substances should be known.
4. Leave the work area immediately if breathing becomes difficult, dizziness or
any other sign of distress occurs.
5. Ensure proper fit on your face before using the respirator.
6. The respirator should not be worn under condition preventing a proper fit on
your face. Such conditions may include growth of beard, mustache, sideburn, the
use of spectacles or any other device containing strap which passes between the
respirator’s sealing edge and the user’s face.
7. If allergy occurs when respirator is in contact with your skin, the respirator
should be removed immediately.
8. Filtering facepieces are to be inspected prior to each use to assure there are
no holes in the breathing zone other than the strap attachment welding points and
no damage has occurred, and enlarged holes resulting from ripped or torn filter
material around welding points are considered damage.
9. The respirator has been tested and small punctures around welding points
are normal and do not interfere with the respirator compliance with Part 84
approval requirements.
