Ninja NN100 Series, Инструкция по эксплуатации

Страница: 21 / 68

20 n i n j a k itc h e n . co m
ENGLISH
CARE &
MAINTENANCE
CLEANING
1
Separate all parts.
2 Wash all containers in warm, soapy water
with a soft cloth.
3 Hand Washing
Wash blade assemblies in warm, soapy
water using a dishwashing utensil with
a handle to avoid direct contact with the
blades. Exercise care when handling
blade assemblies as the blades are sharp.
Thoroughly rinse and air-dry all parts.
Dishwasher
All attachments are dishwasher safe. It is
recommended that the lids, containers and
blade assemblies be placed on the top rack
of the dishwasher ONLY. Ensure that blade
assemblies are removed from their containers
before placing in the dishwasher. Exercise
care when handling blade assemblies.
4
Wipe the motor base with a clean, damp
cloth. Allow time to dry before operation.
STORING
Insert the power cord into the storage area
underneath the motor base. Store the unit
upright and store all blade assemblies inside or
attached to their respective containers with their
lids locked into place.
DO NOT store blended or unblended
ingredients in the Nutri Ninja Cup
®
with the Pro
Extractor Blades
®
assembly attached.
DO NOT stack items on top of the containers.
Store any remaining attachments alongside the
appliance or in a cabinet where they will not be
damaged or create a hazard.
RESETTING THE MOTOR THERMOSTAT
This appliance features a unique safety system
that prevents damage to the motor and drive
system should you inadvertently overload the
appliance. If the appliance is overloaded, the
motor will be temporarily disabled. Should this
occur, follow the reset procedure below.
1
Unplug the appliance from the
electrical outlet.
2 Allow the appliance to cool for
approximately 15 minutes.
3 Remove the container lid and blade assembly.
Empty the container and ensure no ingredients
were jamming the blade assemblies.
4
Reset the unit in accordance with the
applicable instructions for the container
and blade type.
IMPORTANT: Ensure that maximum
capacities are not exceeded. This is the
most typical cause of appliance overload.
If your unit needs servicing, please call
Customer Service at 1-877-646-5288.